Custom rebuild of your original HH Tecumseh compressor*. Rebuild consists of initial test to determine the core is serviceable*, following by stripping exterior surfaces to bare metal. Compressor is dismantled and shaft seal, crank shaft and pistons, reed valves, sight-glass (if equipped) and valve plate are cleaned and inspected. The shaft seal is rebuilt. Compressor is assembled with all new gaskets, o-rings and a full charge of oil. Compressor is performance tested at 1800 rpm's, pressure tested with Nitrogen at 250 psi and painted.
* NOTE 1 - This service is for the compressor only. It does not include services on the clutch/pulley, clutch brushes, service valves, etc, but we do offer services on those components for an additional fee.
** NOTE 2 - Initial serviceable diagnosis of the compressor is not a guarantee that rebuilding services can be completed.
Additional fees apply if all or part of the core, including the shaft seal, requires replacing. If we cannot complete the reconditioning service, you will not be charged for service on the compressor to that point.
