Custom rebuild of your original HG Tecumseh cast-iron compressor*. Rebuild consists of initial test to determine the core is serviceable**, followed by stripping exterior surfaces to bare metal. Compressor is dismantled; crankshaft, pistons, rings, reed valves and valve plate are removed, cleaned and inspected. Compressor is reassembled with all new gaskets, o-rings, a shaft seal and a full 11oz. charge of oil. Compressor is performance tested at 1800 rpm's, pressure tested with Nitrogen at 250 psi and painted.
* NOTE 1 - This service is for the compressor only. It does not include services on the clutch/pulley, clutch brushes, service valves, etc, but we do offer services on those components for an additional fee.
** NOTE 2 - Initial serviceable diagnosis of the compressor is not a guarantee that rebuilding services can be completed. If we cannot complete the reconditioning service, you will not be charged for service on the compressor to that point.