1-877-544-9023
9:30am - 5:30pm EST
Search
Filters

83-87 Chevy GMC Truck A/C Performance Upgrade Kit V8 STAGE-2

Performance Engine Compartment Upgrade Kit. This kit is engineered for your 1983-1986 Chevy & GMC C/K Series (1987 R/V Series) Truck/Blazer/Jimmy/Suburban with factory A/C (Front A/C only) and Chevy V8 engine.
SKU: 22-256
Make: ORIGINAL AIR
*
*
$699.99

Our Stage 2 A/C Performance Upgrade Kit is the ideal solution if you are looking to replace your original engine compartment components with an upgraded rotary style compressor, and parallel flow condenser.

 

INCLUDED: 

  • Rotary Compressor & Clutch Assembly
  • Compressor mount bracket & hardware for the Chevy V8 engine
  • Modern high performance "Parallel Flow" condenser that installs as stock
  • Suction Hose (from evaporator/accumulator outlet to compressor inlet)*
  • Discharge Hose (from compressor outlet to condenser inlet)*
  • Reproduction Liquid Line
  • Replacement Accumulator
  • Replacement Orifice Tube
  • Cycling Switch
  • Refrigerant Tape
  • 134a Charge Port Adapter Set
  • O-ring/Oil Tube Kit
  • Installation Instructions

BENEFITS/FEATURES: 

  • Affordable alternative to replacing individual parts.
  • Eliminates seizing, knocking and shaft seal leak problems associated with the stock R4 "pancake" compressor.
  • Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
  • Reduce horsepower draw.
  • Reduce weight.
  • Continuous duty rating of 6,000 RPM.

NOTE:

* Hoses supplied with one end open, along with the corresponding fitting and crimping instructions. Your local a/c shop can provide crimping services, or we can provide the crimping service for an additional fee. Instructions for both options will be included.

Our Stage 2 A/C Performance Upgrade Kit is the ideal solution if you are looking to replace your original engine compartment components with an upgraded rotary style compressor, and parallel flow condenser.

 

INCLUDED: 

  • Rotary Compressor & Clutch Assembly
  • Compressor mount bracket & hardware for the Chevy V8 engine
  • Modern high performance "Parallel Flow" condenser that installs as stock
  • Suction Hose (from evaporator/accumulator outlet to compressor inlet)*
  • Discharge Hose (from compressor outlet to condenser inlet)*
  • Reproduction Liquid Line
  • Replacement Accumulator
  • Replacement Orifice Tube
  • Cycling Switch
  • Refrigerant Tape
  • 134a Charge Port Adapter Set
  • O-ring/Oil Tube Kit
  • Installation Instructions

BENEFITS/FEATURES: 

  • Affordable alternative to replacing individual parts.
  • Eliminates seizing, knocking and shaft seal leak problems associated with the stock R4 "pancake" compressor.
  • Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
  • Reduce horsepower draw.
  • Reduce weight.
  • Continuous duty rating of 6,000 RPM.

NOTE:

* Hoses supplied with one end open, along with the corresponding fitting and crimping instructions. Your local a/c shop can provide crimping services, or we can provide the crimping service for an additional fee. Instructions for both options will be included.

WHAT ENGINES DO THE COMPRESSOR BRACKETS FIT?

  • This kit is designed for use with the newer 134a refrigerant. Please CLICK HERE for information on converting R12 systems to 134a

  • Stock Small or Big Block Chevy V8 with long water pump and compressor mounted on drivers side (left-hand) of the engine.

  • PLEASE MAKE SURE THE ENGINE FITS WITHIN THE GUIDELINES LISTED ABOVE.
  • UNSURE? Please call or EMAIL with questions.

  • ENGINE BEEN MODIFIED? Please call or EMAIL with details before purchasing


    CAN I INSTALL THESE PARTS MYSELF?

  • The average hobbyist can install without difficulty. General rule of thumb is if you change your own parts, you can change these parts.

  • It is recommended, however, to have the system evacuated & charged by a professional. Hose Crimping instructions can be downloaded by CLICKING HERE.

  • Other than crimping one end of the hoses and charging the system, no other specialized tools or knowledge is required for installation of parts.

 

  • This kit is designed for use with the newer 134a refrigerant. It is important to make sure all components that are being reused (evaporator, condenser, liquid line/hose, all valves) are either changed or flushed and clean of contamination before installation and charging of the system.

Product tags

Shop By Vehicle

Contact Us

Contact Original Air Group

A/C Parts Catalog from Original Air Group

Original Air Catalog

Request a Rebuild from Original Air Group

Rebuild Request Form