77 - 78 1/2 Firebird A/C Performance Upgrade Kit V8 w/Pressure Switch STAGE-3

Ultimate Performance Engine Compartment Upgrade Kit. This kit is engineered for your 1977-1978 1/2 Firebird with factory A/C and Non-Turbo Pontiac or Oldsmobile V8 engine (EXCEPT PONTIAC 301 TURBO).

SKU: 22-602PS-U

Make: ORIGINAL AIR

Engine *

Pontiac 301/350/400/455 V8
Oldsmobile 403 V8

Frequently Added

Blower Resistor 16-602 [+$62.00]
A/C Test Gauges [+$63.00]

Compressor Finish *

Standard Aluminum
Satin Black [+$75.00]

$1,350.00

Qty:

Our Stage 3 A/C Performance Upgrade Kit is our complete solution if you are looking to replace ALL of the refrigeration components of your system with all new and upgraded parts.

INCLUDED:

Rotary Compressor & Clutch Assembly
Compressor Mount Kit designed for the stock Pontiac or Oldsmobile V8 engines (non turbo)with the compressor mounted on the right (passenger) side
Modern high performance "Parallel Flow" condenser that installs as stock
Modern high performance "Parallel Flow" evaporator that installs as stock
Front Liquid Line
Rear Liquid Line w/Pressure Switch Port*
Suction hose (from compressor to accumulator at evaporator)
Discharge hose (from compressor to fitting on condenser)
Replacement accumulator
Replacement orifice tube
Replacement clutch cycling switch
134a Charge Port Adapter
O-ring/Oil Tube Kit
Installation Instructions

BENEFITS/FEATURES:

Affordable alternative to replacing individual parts.
Eliminates shaft seal leak problems associated with the stock compressor.
Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
Reduce horsepower draw.
Reduce weight.
Continuous duty rating of 6,000 RPM.

NOTE:

* This kit is for cars that DO have a pressure switch (not included) mounted on the rear liquid line. Please see our other kit if your vehicle does not have a pressure switch.

Overview
Mount Instructions
F.A.Q.
Contact Us

Our Stage 3 A/C Performance Upgrade Kit is our complete solution if you are looking to replace ALL of the refrigeration components of your system with all new and upgraded parts.

INCLUDED:

Rotary Compressor & Clutch Assembly
Compressor Mount Kit designed for the stock Pontiac or Oldsmobile V8 engines (non turbo)with the compressor mounted on the right (passenger) side
Modern high performance "Parallel Flow" condenser that installs as stock
Modern high performance "Parallel Flow" evaporator that installs as stock
Front Liquid Line
Rear Liquid Line w/Pressure Switch Port*
Suction hose (from compressor to accumulator at evaporator)
Discharge hose (from compressor to fitting on condenser)
Replacement accumulator
Replacement orifice tube
Replacement clutch cycling switch
134a Charge Port Adapter
O-ring/Oil Tube Kit
Installation Instructions

BENEFITS/FEATURES:

Affordable alternative to replacing individual parts.
Eliminates shaft seal leak problems associated with the stock compressor.
Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
Reduce horsepower draw.
Reduce weight.
Continuous duty rating of 6,000 RPM.

NOTE:

* This kit is for cars that DO have a pressure switch (not included) mounted on the rear liquid line. Please see our other kit if your vehicle does not have a pressure switch.

WHAT ENGINES DO THE COMPRESSOR BRACKETS FIT?

This kit is designed for use with the newer 134a refrigerant. Please CLICK HERE for information on converting R12 systems to 134a
Any stock Pontiac V8 301, 326, 350, 389, 400, 455 engine with compressor mounted on passenger side (right-hand) of the engine.
PLEASE MAKE SURE THE ENGINE FITS WITHIN THE GUIDELINES LISTED ABOVE.
UNSURE? Please call or EMAIL with questions.
ENGINE BEEN MODIFIED? Please call or EMAIL with details before purchasing

CAN I INSTALL THESE PARTS MYSELF?
The average hobbyist can install without difficulty. General rule of thumb is if you change your own parts, you can change these parts.
It is recommended, however, to have the system evacuated & charged by a professional.
Other than charging the system, no other specialized tools or knowledge is required for installation of parts.

This kit is designed for use with the newer 134a refrigerant. It is important to make sure all components that are being reused (evaporator, condenser, liquid line/hose, all valves) are either changed or flushed and clean of contamination before installation and charging of the system.

Name *

Email *

Inquiry *

Product tags

22-602ps-u (1)

Customers who bought this item also bought

67-77 GM A/C Blower Motor

$61.00

67-77 GM A/C Blower Motor

77 - 78 1/2 Firebird A/C Performance Upgrade Kit V8 w/Pressure Switch STAGE-3

Our Stage 3 A/C Performance Upgrade Kit is our complete solution if you are looking to replace ALL of the refrigeration components of your system with all new and upgraded parts.

INCLUDED:

BENEFITS/FEATURES:

NOTE:

Our Stage 3 A/C Performance Upgrade Kit is our complete solution if you are looking to replace ALL of the refrigeration components of your system with all new and upgraded parts.

INCLUDED:

BENEFITS/FEATURES:

NOTE:

67-77 GM A/C Blower Motor

65-74 Custom GM Evaporator/Blower Unit Rebuild

SERVICE - Custom Heater Box-Only Rebuild