1-877-544-9023
9:30am - 5:30pm EST
Search
Filters

67 Camaro A/C Performance Upgrade Kit SMALL BLOCK V8 STAGE-3

Ultimate Performance Engine Compartment Upgrade Kit. This kit is engineered for your 1967 Camaro with factory A/C and Small Block Chevy V8 engine.
SKU: 22-213ASB U
*
*
*
$1,350.00

Our Stage 3 A/C Performance Upgrade Kit is a complete solution if you are looking to replace all of the original refrigerant components of your system with all new and upgraded parts.

INCLUDED: 

  • Rotary Compressor & Clutch Assembly
  • Compressor Mount Kit designed for the Chevy Small Block V8 engines with the compressor mounted on the right (passenger) side and a short water pump engine
  • Modern DIRECT FIT high performance Parallel Flow condenser
  • Modern DIRECT FIT high performance Parallel Flow evaporator core
  • POA Eliminator Kit
  • Expansion valve & refrigerant tape
  • Reproduction condenser mount brackets
  • Suction Hose (from evaporator/POA Valve outlet to compressor inlet)*
  • Discharge Hose (from compressor outlet to condenser inlet)*
  • All liquid hoses & fittings *
  • Filter-Drier & mount
  • O-ring/Oil Tube Kit
  • Installation Instructions

BENEFITS/FEATURES: 

  • Affordable alternative to replacing individual parts
  • Eliminates shaft seal leak problems associated with the stock compressor
  • Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
  • Reduce horsepower draw
  • Reduce weight
  • Continuous duty rating of 6,000 RPM

NOTE:

* Hoses supplied with one end open, along with the corresponding fitting and crimping instructions. Your local a/c shop can provide crimping services, or we can provide the crimping service for an additional fee. Instructions for both options will be included.

Our Stage 3 A/C Performance Upgrade Kit is a complete solution if you are looking to replace all of the original refrigerant components of your system with all new and upgraded parts.

INCLUDED: 

  • Rotary Compressor & Clutch Assembly
  • Compressor Mount Kit designed for the Chevy Small Block V8 engines with the compressor mounted on the right (passenger) side and a short water pump engine
  • Modern DIRECT FIT high performance Parallel Flow condenser
  • Modern DIRECT FIT high performance Parallel Flow evaporator core
  • POA Eliminator Kit
  • Expansion valve & refrigerant tape
  • Reproduction condenser mount brackets
  • Suction Hose (from evaporator/POA Valve outlet to compressor inlet)*
  • Discharge Hose (from compressor outlet to condenser inlet)*
  • All liquid hoses & fittings *
  • Filter-Drier & mount
  • O-ring/Oil Tube Kit
  • Installation Instructions

BENEFITS/FEATURES: 

  • Affordable alternative to replacing individual parts
  • Eliminates shaft seal leak problems associated with the stock compressor
  • Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
  • Reduce horsepower draw
  • Reduce weight
  • Continuous duty rating of 6,000 RPM

NOTE:

* Hoses supplied with one end open, along with the corresponding fitting and crimping instructions. Your local a/c shop can provide crimping services, or we can provide the crimping service for an additional fee. Instructions for both options will be included.

WHAT ENGINES DO THE COMPRESSOR BRACKETS FIT?

  • This kit is designed for use with the newer 134a refrigerant. Please CLICK HERE for information on converting R12 systems to 134a

  • Stock Small or Big Block Chevy V8 with short water pump and compressor mounted on passenger side (right-hand) of the engine.

  • PLEASE MAKE SURE THE ENGINE FITS WITHIN THE GUIDELINES LISTED ABOVE.
  • UNSURE? Please call or EMAIL with questions.

  • ENGINE BEEN MODIFIED? Please call or EMAIL with details before purchasing


    CAN I INSTALL THESE PARTS MYSELF?

  • The average hobbyist can install without difficulty. General rule of thumb is if you change your own parts, you can change these parts.

  • It is recommended, however, to have the system evacuated & charged by a professional. Hose Crimping instructions can be downloaded by CLICKING HERE.

  • Other than crimping one end of the hoses and charging the system, no other specialized tools or knowledge is required for installation of parts.

  • This kit is designed for use with the newer 134a refrigerant. It is important to make sure all components that are being reused (evaporator, condenser, liquid line/hose, all valves) are either changed or flushed and clean of contamination before installation and charging of the system.

Products specifications
Compressor
Compressor Mount
Mount Hardware & Spacers
Suction Hose
Discharge Hose
Filter/Drier
Filter/Drier Bracket Set
O-Rings & Lubricant
Refrigerant Tape
Parallel Flow Condenser
Condenser Mount Brackets
Liquid Hose
Evaporator
Expansion Valve
POA Eliminator
*
*
*
Products specifications
Compressor
Compressor Mount
Mount Hardware & Spacers
Suction Hose
Discharge Hose
Filter/Drier
Filter/Drier Bracket Set
O-Rings & Lubricant
Refrigerant Tape
Parallel Flow Condenser
Condenser Mount Brackets
Liquid Hose
Evaporator
Expansion Valve
POA Eliminator
Product tags